Bobcat MT100 Mini Track Loader: a buyer’s guide

The Bobcat MT100 is one of the most common stand-on mini track loaders in the 1,000-lb ROC class, and it earns that spot for more than brand familiarity. It fits through gates, works cleanly on finished surfaces, and has the real hydraulic and lifting capability needed for routine contractor and fleet work. For buyers comparing mini skid steers in this category, the MT100 sits in a practical middle ground: compact enough for tight access, but heavy and stable enough to handle serious day-to-day material handling.

If you’re shopping this machine, you’re likely also comparing it to other 1,000-lb minis like the Kubota SCL1000. On paper they look close, but they don’t behave the same once you’re lifting pallets, grading base, or running hydraulic attachments. This guide focuses on what matters in real use: specs that affect output, lift feel, control geometry, track behavior, and where the MT100 holds spec-based advantages.

What the MT100 is built for (and what it isn’t)

The MT100 is designed for tight-access, high-cycle work where a full-size skid steer is too wide or too hard on finished terrain. It’s a strong fit for landscaping, utility trenching support, hardscape loading, property maintenance, and small demolition prep.

Where it’s less ideal is constant, attachment-heavy work that demands high auxiliary flow all day (like aggressive mulching), or jobs where long travel distance and speed across large sites is the priority.

Bobcat MT100 specs snapshot

Here’s a buyer-focused spec sheet — the numbers that actually help you compare this class.

Bobcat MT100 – Key specs (US)

Spec	Value
Rated operating capacity (ROC)	1,000 lb
ROC w/ counterweight (carry position)	~1,300 lb
Operating weight	~3,390 lb
Engine power (gross)	~24.8 hp
Width	~35.6 in
Height to bucket hinge pin	~80.9 in
Aux hydraulic standard flow	~11–12 gpm
Travel speed (forward)	~4.1 mph

Here’s what those specs mean in practice. First, the MT100 is heavier than most 1,000-lb ROC minis, which directly improves stability when you’re carrying forks or a loaded bucket. Second, auxiliary flow is solid for standard attachments, but it’s not the highest in class — which matters if your workload leans heavily on hydraulic tools.

Lift performance: how much can the MT100 really lift?

The MT100 is rated at 1,000 lb ROC, meaning that’s the safe, repeatable working capacity you can lift and carry confidently. In real jobsite use, it feels strongest lifting over the front, and the heavier chassis keeps the machine planted with pallets, pavers, and full buckets.

Like all mini loaders, lift capability drops as the load moves farther away from the machine, so the MT100 rewards tight, efficient loading habits. If your work includes a lot of “reach and place” at full extension, lift geometry becomes as important as the raw ROC number.

Arm movement, reach, and control feel

The MT100 uses a radial lift path, which is a big reason operators describe it as feeling strong down low. The boom arcs forward as it rises, giving you good breakout leverage and rollback control during digging, grading, and backfilling. In this class, radial lift generally suits workflows where most of your work happens at ground level or mid-height — loading, carrying, dumping, and reshaping material quickly.

If you demo one, the key thing to test is low-speed feathering under load. A mini loader that creeps smoothly and holds rollback angles well will always feel more productive than one that fights you, even if the spec sheet is similar.

Tracks, ground pressure, and what to check used

The MT100’s narrow tracked stance is what keeps it under 36 inches wide, so it can access yards and corridors that other minis can’t. The trade-off is that narrow machines are a bit more sensitive to side-load habits and track wear over time.

If you’re buying used, check:

• track lug condition for chunking/cracks
• front idlers and rollers for uneven wear
• track tension feel (too loose or too tight can signal undercarriage neglect)
• auxiliary couplers for seepage — often overlooked on minis

A clean undercarriage matters more than buyers expect in long-term cost.

Attachments that make the most sense on an MT100

With ~11–12 gpm auxiliary flow, the MT100 supports the attachments most mini-track buyers run weekly.

Best-fit bundles:

• Landscaping: bucket, auger, trencher
• Hardscape/material handling: forks, grapple, breaker
• Property maintenance: snow blade, broom, stump grinder (within flow limits)

Instead of trying to outfit every attachment possible, the MT100 works best when you build a tight workflow around 2–4 tools you’ll actually use often.

Bobcat MT100 vs Kubota SCL1000: spec-based differences that matter

Because the MT100 and SCL1000 sit in the same 1,000-lb mini track loader class, the decision isn’t about size — it’s about which specs better match your work. Differences in hydraulic flow, lift geometry, operating weight, and travel speed are what separate them on real jobsites.

MT100 vs Kubota SCL1000 – Buyer spec comparison (US)

Spec	Bobcat MT100	Kubota SCL1000
Rated operating capacity	1,000 lb	1,000 lb
Operating weight	~3,390 lb	~3,035 lb
Engine power	~24.8 hp	~24.8 hp
Height to hinge pin	~80.9 in	~84.7 in
Aux hydraulic flow	~11–12 gpm	~15 gpm
Travel speed (forward)	~4.1 mph	~4.9 mph
Lift path	Radial	Vertical

Where the MT100 has a spec-driven edge

• Stability under load: heavier machine at the same ROC means a more planted feel on forks, side slopes, and rough grading.
• Low-end leverage: radial lift feels strong in breakout and rollback at working height, which matters in digging and base prep workflows.

Where the SCL1000 pulls ahead

• More hydraulic capacity: higher auxiliary flow benefits flow-hungry attachments and sustained tool work.
• Higher reach and vertical lift: slightly more hinge-pin height and vertical geometry help with truck loading and placement at full height.
• Faster travel: useful if you’re moving frequently across big sites.

Simple framing: if your work is mostly material handling + grading + tight access, the MT100’s stability and low-end feel are real advantages. If your work is attachment-heavy and hydraulics-driven, the SCL1000’s flow and lift geometry might fit better.

Bottom line: is the MT100 the right mini-track for you?

The Bobcat MT100 is a stable, tight-access 1,000-lb ROC mini track loader with enough power and hydraulic output to handle the attachment bundles most buyers actually use. It’s a strong all-rounder for fleets and owner-operators who need compact access without giving up lift confidence. If your daily work leans toward hydraulic-heavy attachments or frequent high-reach loading, spec-leading rivals are worth a close look — but for ground-level productivity in tight spaces, the MT100 remains one of the most balanced machines in its class.

See also

Cat 306 mini excavator: Specs, weight, price & key features